Kent® Sili-Gasket - E-Z Lever Red RTV Silicone Sealant

RTV silicone gasket sealant compound specially formulated to bond rubber, metal, cork and glass components.
Performance Characteristics
• E-Z Trigger Lever provides maximum control
• Skins over quickly
• Remains flexible – will not harden, shrink or crack
• Resists gasoline and most automotive solvents
• 8 oz. net weight
• Temperature Range:_x000D_ –65°F to +500°F (–54°C to +260°C) continuously, –65°F to +600°F (–54°C to +316°C) intermittently
Applications
Universal replacement of conventional gaskets. Use on timing chain covers, oil/transmission pans, heater-blower mounts, and thermostat and transmission housings.
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.
2. To open, turn nozzle counterclockwise for 1/4 turn to open valve and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.
3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.
4. Replace nozzle back over valve with the thicker of the