Welcome! Register now to see your pricing!
Close
Drive Anchor, Alloy Steel, Zinc Finish, Flat Head, 1/4 x 3" (Pack of 25)
Representative Image Only
Documents
• Made of high-strength heat-treated alloy steel with zinc plating
• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
• Made of high-strength heat-treated alloy steel with zinc plating
• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
† May Require Additional Delivery Time to Canada